BLM NORMAL UNIT STOCKING LIST

BLM Normal Unit Stocking (NUS)
Updated 04/02/2020
 
Category Item Description Engine Type C&S PART NUMBER
3, 4, & 5 6
Fire Tools & Equipment** Shovel 1 1  
Pulaski 1 1  
Backpack Pump 3 2 GENFO45
Fusees (case) 1 0.5  
Foam, concentrate, Class A (5-gallon) 1 1  
Chainsaw Kit (includes chaps/tools) 1 1  
Drip Torch 2 1 DT125
Portable Pump light weight * *  
Portable Pump Mark 3 * *  
McLeod ** **  
Combination Tool ** **  
Specialty Scraping Tool ** **  
** - A minimum of five tools for type 3, 4, 5, and 6 engines is required.  The listed numbers of tools are required to be on the engine. Tools listed as optional or additional required tools can make up the rest of the minimum number required for engines.  
Medical First Aid Kit, 10-person 1 1  
Fire First Response Kit 1 1  
General Supplies Flashlight * *  
Chock Block (set) 1 1  
Tow Chain/Cable/Tow Strap (comply w/GVW) 1 1  
Jack, hydraulic (comply w/GVW)  1 1  
Lug Wrench 1 1  
Pliers, fence 1 1  
Food , MRE (48-hour supply/per person) 1 1  
Rags * *  
Rope/Cord (feet) 50 50  
Sheeting, plastic, 10’ x 20’ 1 1  
Tape, duct 1 1  
Tape, filament (roll) 2 2  
Potable Water : 1 liter /per person/  per hour minimum (8 hr shift = 2 Gallons) 2 gal/per 2 gal/per  
Bolt Cutters 1 1  
Toilet Paper (roll) * *  
Cooler or Ice Chest * *  
Hand Primer, Mark III * *  
Hose Clamp 2 1 HC-15 or HC1510
Hose Gaskets (ea) ¾, 1, 1 ½, 2 ½  inch 2 2 GASKET_KIT
Pail, collapsible 1 1  
Hose Reel Crank 1 1  
Safety Fire Extinguisher (5 lb) 1 1  
Flagging, Pink (roll) 1 1  
Flagging, Yellow w/Black Stripes (roll) 1 1  
Flagging, Escape Route (roll) 1 1  
Can, gas, 5-Gal, DOT/OSHA approved * *  
Reflector Set  1 1  
Traffic Vest (one per seating position) 3 3  
Vehicle & Pump Support General Tool Kit (5180-00-177-7033/GSA) 1 1  
Oil, automotive, quart 2 1  
Oil, penetrating, can 1 1  
Oil, transmission * *  
Brake Fluid, pint (if equipped w/ hydraulic brakes) 1 1  
Filter, Fuel : Gas or Diesel as required * *  
Filter, Air: Chassis and Aux Pump * *  
Fan Belts * *  
Spark Plugs (if equipped) 1 1  
Hose, air compressor w/adapters (if equipped with air compressor) 1 1  
Fuse set  (Vehicle Specific) 1 1  
Tire Pressure Gauge 1 1  
Jumper Cables 1 1  
Battery Terminal Cleaner * *  
Tape, electrical, plastic 1 1  
Tape, Teflon 1 1  
Personal Gear (Extra Supply) File, mill, bastard * *  
Head Lamp (NFES 0713 or equivalent) 1/per 1/per  
Hard Hat 1 1  
Eye Protection 1 1  
Gloves 1 1  
First Aid Kit, individual 1 1  
Fire Shirt * *  
Fire Shelter w/case & liner 1 1  
Packsack 1 1  
Batteries, Type AA (1 box=144 ea) 1 1  
Ear Plugs (pair) 3 3  
Chaps, protective (for swamper) 1 1  
Radio Portable (with batteries) 1 1  
Mobile 1 1  
Hose Booster Reel (100 feet total) 1 1  
Suction (length, 8’ or 10’) 2 2  
1” NPSH (feet)* 300 300  
1 ½” NH (feet)* 300 300  
¾” NH, garden (feet) 300 300  
1 ½” NH, engine protection (feet) 20 20  
1 ½” NH, refill (feet) * *  
Type 3 Engines require an additional 200 feet of 1" hose and 700' of 1 1/2" hose for a total of 500' and 1000' of each  to meet NWCG typing.  
Nozzle Forester, 1” NPSH 2 1 TT300 NPSH
Adjustable, 1” NPSH 4 3 110/23BL NPSH
Adjustable, 1 ½” NH 5 2 1560/20 NST
Adjustable, ¾” NH 4 2 GH BRASS NOZZLE
Foam, ¾” NH 1 1 WS-FN18-75
Foam 1 ½” NH 1 1 WS-FN60-15
Mop-up Wand * * APP-2
Tip, Mop-up Wand * * APP-TIP
Tip, Forester, Nozzle, fog * * TT300 - FOG TIP 3GPM
Tip, Forester Nozzle, straight stream * * TT300 TIP - 3/16"
Wye 1” NPSH, Two-Way, Gated 2 2 WV1010 NPSH
1 ½” NH, Two-Way, Gated 4 3 WV15 NST
¾” NH w/Ball Valve, Gated 6 4 WV75B
Adapter 1” NPSH-F to 1” NH-M * * AD1NP1NH
1” NH-F to 1” NPSH-M 1 1 AD1NH1NP
1 ½” NPSH-F to 1 ½” NH-M 1 1 AD1.5NP1.5NH
1 ½” NH-F to 1 ½” NPSH-M * * AD1.5NH1.5NP
Increaser ¾” NH-F to 1” NPSH-M * * AD75GHT1NP
1” NPSH-F to 1 ½” NH-M 1 1 AD1NP1.5NH
Coupling 1” NPSH, Double Female 1 1 ADFF1NP1NP
1” NPSH, Double Male 1 1 ADMM1NP1NP
1 ½”  NH, Double Female 1 1 ADFF1.5NH1.5NH
1 ½” NH, Double Male 1 1 ADMM1.5NH1.5NH
Reducer/
Adapter
1” NPSH-F to ¾” NH-M 3 3 AD1NP75GHT
1 ½”  NH-F to 1 NPSH-M 6 4 AD1.5NH1NP
2”  NPSH-F to 1 ½” NH-M * * AD2NP1.5NH
2 ½” NPSH-F to 1 ½” NH-M * * AD2.5NP1.5NH
Reducer 1 ½” NH-F to 1” NH-M 1 1 AD1.5NH1NH
2 ½” NH-F to 1 ½” NH-M 1 1 AD2.5NH1.5NH
Tee 1” NPSH-F x 1” NPSH-M x 1” NPSH-M, w/cap * * T-1 NPSH
1 ½” NH-F x 1 ½” NH-M x 1” NPSH-M w/cap * * T-1.5NHNP
1 ½” NH-F x 1 ½” NH-M x 1” NPSH-M w/valve * * TV1510 NH-NP
Valve 1 ½” NH-F, Automatic Check and Bleeder 1 1  
¾” NH, Shut Off 5 5 SBV75R GHT
1” NPSH Shut Off 1 1 WSV-1 NPSH
1 ½” NH Shut Off 1 1 WSV-15 NST
Foot, w/strainer 1 1 FV-A 1 1/2" NST
Ejector 1” NPSH x 1/12” NH, Jet Refill * *  
Wrench Hydrant, adjustable,  8” 1 1  
Spanner, 5”, 1” to 1 ½” hose size 4 1 SW1
Spanner, 11”, 1 ½” to 2 ½” hose size 2 2 SW2
Pipe, 14” * *  
Pipe, 20” * *  
Other Current Interagency Standards for Fire and Fire Aviation Operations 1 1  
Belt Weather Kit 1 1  
Binoculars 1 1  
Maps 1 1  
Vehicle Book w/all applicable forms 1 1  
Current Emergency Response Guidebook 1 1  
Owners and Operators Manuals 1 1  
  * - No minimum Stocking Required
carried by engines as an option, within weight limitations